Control & Instrumentation (C&I) Reliability Engineer
AI job insight
Genser Energy is hiring a C&I Reliability Engineer in the Western Region, Ghana. The role focuses on managing asset reliability risks, supporting plant availability, and driving predictive and preventive maintenance across automation, control, and rotating equipment. Candidates need a BSc in Control & Instrumentation, Electronic, Mechatronic, or Electrical Engineering plus at least 4 years of oil & gas or power plant reliability experience.
- Full-time role based in Western Region, Ghana
- Reports to the C&I Reliability Superintendent at plant level
- Focus on reliability, predictive maintenance, and CMMS optimization
Similar jobs
More roles you may want to review before you leave.AI summary
Genser Energy is hiring a C&I Reliability Engineer in the Western Region, Ghana. The role focuses on managing asset reliability risks, supporting plant availability, and driving predictive and preventive maintenance across automation, control, and rotating equipment. Candidates need a BSc in Control & Instrumentation, Electronic, Mechatronic, or Electrical Engineering plus at least 4 years of oil & gas or power plant reliability experience.
- Full-time role based in Western Region, Ghana
- Reports to the C&I Reliability Superintendent at plant level
- Focus on reliability, predictive maintenance, and CMMS optimization
- Requires BSc in Control & Instrumentation, Electronic, Mechatronic, or Electrical Engineering
- Minimum 4+ years experience in oil & gas or power plant reliability
- Salary listed as negotiable
AI job guide
Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.
AI salary guide
Source salary availableThe source lists Salary negotiable. Confirm the final pay, benefits, contract terms and allowances directly with the employer before accepting an offer.
Can you qualify for this role?
- Required4+ years of relevant experienceThe job post includes a minimum experience signal.
- PreferredPractical evidence in security, seguranca, Reliability EngineerThe tags and summary point to skills connected with this role.
- RequiredAvailability to work in WesternThe vacancy is associated with this location.
- UnclearComfort with the Full Time contract termsConfirm hours, duration, probation and benefits at the original source.
Documents to prepare
- Likely requiredUpdated CV
- Role specificCover letter or short employer message
- OptionalProfessional references
- VerifyID or passport only after verifying the employer
Application tips for this job
- Place your strongest Control & Instrumentation (C&I) Reliability Engineer evidence in the first half of your CV.
- In your cover letter or employer message, connect your experience to Genser Energy and the role in Western.
- Add concrete examples related to security, seguranca, Reliability Engineer, ideally with measurable outcomes or clear responsibilities.
- Follow the instructions from Others; avoid sending documents to unofficial contacts or copied links.
- Confirm the deadline, interview location and employer contact before sharing personal documents.
Source and safety check
- Others
- Original source link available
- Application method is clear
- Deadline not specified
- No major risk signal was detected in the captured text.
Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.
Interview preparation
- What experience makes you a strong fit for this Control & Instrumentation (C&I) Reliability Engineer role in security, seguranca?
- How have you handled responsibilities similar to those in this job post?
- Are you available to work in Western under the listed contract or schedule?
- Prepare examples with clear responsibilities, tools used and measurable outcomes.
- Review the source and research Genser Energy before the interview.
Ask what the first priorities will be in the role and how success will be measured.
Similar jobs to consider
Use AI to apply better
After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.
Original source description
Salary negotiable
Vacancies
1
Open
Job Type: Full-time
Western
Apply on Company Site
Want to track your applications, save jobs, and get alerts?
Create a free account
Want faster job alerts?
Join our Telegram or WhatsApp channel for fresh Ghana jobs, urgent openings, and National Service updates the moment they land.
Join Telegram
Join WhatsApp
Job Description
- Entity:
- GEGL
- Position:
- Control & Instrumentation (C&I) Reliability Engineer
- Division / Department:
- Operations & Maintenance (OM) / POWER
- Western Region, Ghana (West Africa)
- Report Directly to:
- C&I Reliability Superintendent
- Designation Level:
- Sectional Head
- OBJECTIVE:
- The C&I Reliability Engineer will be responsible for providing support with the identification and management of asset reliability risks that could adversely affect the plant and operations. The C&I Reliability Engineer will contribute to ensure the availability of assets and the overall reliability of the plant (equipment, processes, utilities, facilities, and safety/security systems) through good practices of monitoring and maintenance.
Key Responsibilities
- OPERATIONS & MAINTENANCE (OM)
- Ensure the reliability and maintainability of installations. Responsible for adhering to the life cycle asset management (LCAM) process throughout the entire life cycle of assets:
- Gas regulation and metering stations.
- Pumps, air compressors, and other rotating equipment.
- Electrical motors.
- Fire suppression systems.
- Fire detection and extinguishing systems.
- Pipe systems, tubbing systems, valves, and pipe fittings.
- Tanks, vessels, pressure vessels, and heat exchangers.
- Boilers, chillers, and heaters.
- All automation and control systems associated with the equipment listed above.
- Support with designing, developing, monitoring, and refining an asset maintenance plan that includes:
- Value-added predictive, proactive, preventive, and corrective maintenance tasks.
- Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems.
- Ensure the optimum utilization of the CMMS.
- Read and propose interpretation of blueprints, data sheets and specifications, control and wiring diagrams, list of instruments and signals, list of cables and materials, control loops, architectures and control philosophies, control narratives.
- Provide input to a risk management plan that will anticipate reliability-related and non-reliability-related risks that could adversely impact the plant operations.
- Propose engineering solutions to repetitive failures and all other problems that adversely affect the plant operations (capacity, quality, cost, or regulatory compliance issues):
- Statistical process control.
- Reliability modeling and prediction.
- Fault tree analysis.
- Weibull analysis.
- Six Sigma (6σ) methodology.
- Other parameters that define operating condition, reliability, and costs of assets.
- Execute predictive and preventive maintenance to eliminate catastrophic failures and unplanned maintenance.
- For all activities that require a permit to work, prepare the supporting documentation.
- Maintain required regulatory documentation updated.
- PROCUREMENT & LOGISTICS
- Provide support with all Purchase and Service Order Agreements relating to the maintenance of the plant.
- Ensure materials are available for planned maintenance, overhauls, and mandatory inspections.
Qualifications
- BSc in Control & Instrumentation, Electronic, Mechatronic, or Electrical Engineering.
- KNOWLEDGE &
Experience
A minimum of 4+ years of
in the oil & gas industry, in power plant management and reliability processes.
Familiarity with regulatory
Requirements
for operating plants, including Process Safety Management, OSHA regulations, EPA regulations, EEOC guidelines, and other federal and local requirements.
Familiarity with Instrumentation and Industrial Automation, Supervision Systems (SCADA and HMI), PLC-PAC programming, and industrial networks.
COMPETENCIES:
Proactivity: Ability to define complex technical problems and develop a range of solutions in differing situations.
Ability to manage technical issues in a continually changing business environment.
Flexibility: Ability to operate flexible work practices to achieve optimum results.
Good Communications: Consistently communicate. Be a good listener and negotiator.
Work Diligently: Manage multiple projects and deliver in a timely manner.
Training and Development: Accountable for self-development, training, and development of subordinates.
Optimization: Navigate complexities and uncertainties, and drive efficiency by use of technology.
Organizational Skills: Excellent planning, organizational and time management skills, and ability to coordinate activities across a wide range of disciplines.
Skills
Control Systems Installation
Predictive Maintenance
Process Safety Management
Asset Reliability
Calibration of Instrumentation
Similar Jobs
View all →
Electrician Journeyman - Lead (Tier 3) - Accra
Fluor Corporation
Full-time
Accra, Greater Accra
Salary negotiable
Posted 1 month ago
Utilities Manager - Appolonia City, Ghana
Tatu City
Full-time
Oyibi, Greater Accra
Salary negotiable
Posted 1 month ago
Field Service Engineer
IQVIA
Full-time
Accra, Greater Accra
Salary negotiable
Posted 1 month ago
Field Engineering Program - Generator Specialist
FieldCore
Full-time
Ghana
Salary negotiable
Posted 1 month ago
Job Overview
Salary negotiable
Vacancies
1
Open
Job Type: Full-time
Western
Apply on Company Site
Want to track your applications, save jobs, and get alerts?
Create a free account
About the Employer
Genser Energy
Oil and Gas
· 201-500 employees
Powering the future of Africa, sustainably. Genser Energy specializes in providing sustainable distributed generation energy solutions.
Genser Energy develops and delivers integrated energy solutions that support industrial growth, strengthen critical infrastructure, and create long-term value for partners across West Africa.
View Company Profile
Apply on Company Site